-40%
LIBERTY 1 HP Grinder Pump,CSCR Motor,50 ft.Max Head,Silicone Carbide Shaft seal
$ 475.2
- Description
- Size Guide
Description
Product DetailsThese general purpose 110 to 120V sewage grinder pumps shred large particles into small fragments so the waste can be pumped into a sewage system. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Sewage grinder pumps (also known as grinder pumps) have a grinding plate on the bottom that shreds large particles into small fragments so the pump inlet won't clog and the waste can be pumped into a sewage system. These sewage grinder pump systems are not for use with septic systems since the small particles will not be filtered out in the septic system's drain field and will contaminate the groundwater.
Technical Specs
Item
Grinder Pump
HP
1
Rated Voltage
115VAC
Hz
60
Phase - Pumps
1
Amps
12
Motor Type
CSCR
Body Material
Cast Iron
Impeller Material
Cast Iron
Shaft Seal Material - Pumps
Silicone Carbide
Switch Actuation
No Switch Included
Switch Electrical Connection
Piggyback
Flow Rate @ 10 Ft. of Head
42 gpm
Flow Rate @ 15 Ft. of Head
39 gpm
Flow Rate @ 20 Ft. of Head
36 gpm
Flow Rate @ 40 Ft. of Head
15 gpm
Max. Head
50 ft.
Min. Sump Pit Dia.
24"
Overall Height
17-3/4"
Cord Length
10 ft.
Discharge
2" FNPT
Overall Length
13-1/2"
Max. Diameter Solids
2"
Max. Liquid Temp.
140 Degrees F
Duty Cycle
Intermittent
Thermal Protection
Yes
RPM
3450
Agency Compliance
CSA, UL 778