Sewing DIY PatchworkTool Piping with Edging Cloth Strip Cola Fabric Belt Curling

Description

Sewing DIY PatchworkTool Piping with Edging Cloth Strip Cola Fabric Belt Curling
Item No.: Boxed edging set
Name of Product: New Handmade Patchwork DIY Edger Roller Belter Edger Edger Sewing Tool Set
Specification: 18*13*3cm
Product List:
6mm, 12mm, 18mm, 25mm edging: 1 each
Small edging clip: 4
Log cone: 1
6290 edge presser foot 1
32mm bead pin: 50 pieces
material: plastic
Weight: about240g
Instructions:
1. Make strips: Cut a strip of parallel strips at a 45-degree angle according to the width you need.
2. With the reverse side of the belt-up device facing up, insert the prepared strip from the wide mouth and use the awl tip to pull the strip out of the front of the belt.
3. Fix the front end of the pulled strip with a positioning pin on the ironing board. While pulling the belt, pull the iron close to the front end of the webbing, and let the pulled strip be ironed immediately.
Instructions for use:
Example: 12MM belt maker, prepare a diagonal strip of 24mm width, which needs to be longer than the expected length. When in use, cut the front end of the strip into a triangle shape for placement. From the large end of the belt, the small end is out. After pulling out the strip, tidy it up and iron it with an iron.
tips:
6mm is the finished width of the edging strip. Prepare a 12mm wide diagonal cut strip with a 3mm edge (with edging strips folded in half)
12mm is the finished width of the edging strip. Prepare a diagonal strip of 24mm width with a 6mm edge (with edging strips folded in half)
18mm is the finished width of the edging strip. Prepare a 36mm wide diagonal cut strip with a 9mm edge (with edging strips folded in half)
25mm is the finished width of the edging strip. Prepare a diagonal strip of 46mm width with a side of 11.5mm (with edging strips folded in half)
Friendly tips for your reference
6mm (narrow side type): thin belt decorative edge commonly used models of glass painted patchwork;
12mm (narrow side type): common models for thin belts and decorative edges;
18mm (conventional type): regular width of the edging strip;
25mm (wide side type): thick work / wide side wrapping with regular width;
Payment Method
Shipping Policy
Return Policy
Feedback
Contact us
Payment Method
If you have any special request(shipping address/colors/size and so on), Please leave note in payment when making payment.
Shipping Policy
Normally orders will be shipped within 3 working days.
Please make sure your shipping address and the order information is correct before placing an order. We will not be responsible for item loss due to wrong or unknown address.
Please make sure there is a phone number in your order, in case that the post office need it to contact you if address is not available or other reasons.
International buyers are responsible for duties and customs fees.
Return Policy
Returns and Exchange accepted within 30 Days.
If the item you received is faulty, damaged or incorrect, or any further problems, please contact our customer service with a photo on eBay within 30 days from item received.
If customer placed a wrong order or if there's no quality problem, then customer will take the resposibility for the return shipping cost.
Feedback
Please leave us a positive feedback if you are happy with our product and service.
We always try our best make sure you have a pleasant experience with your purchases.
If you have any questions or needs with your order, feel free to contact us.
Contact us
Working Days: Monday to Saturday.
Please leave us a message if you have some questions or needs, we will reply you as soon as possible.